• Microprocessor - Controls functions; typical evacuation time and recharge amounts are pre-programmed as defaults but can be easily changed as needed; also signals when time to drain oil container, change source tank, change filter-drier. • Refrigerant identifier - Can save you thousands of dollars by warning you of contaminated or mixed refrigerants. Verifies 98% purity automatically at the beginning of each job. • Electronic scale - Permanently mounted inside the cabinet • One hookup - All service work is done in one fast continous operation through the standard high and low side hook-ups to the vehicle. Single pass recycling meets SAE specs. • Heavy-duty compressor - Field proven compressor pulls from both the low and high sides to recover all refrigerant from vehicle quickly. • Oil-less vacuum pump - Maintenance free pump quickly pulls to deep vacuum conditions for thorough evacuation; removes air and moisture so system operates at peak efficiency • Automatic air purge - Test refrigerant before recovery and continuously monitors refrigerant in the internal vessel, automatically purges air as needed • Built-in diagnostics - If any operating parameters are incorrect, unit alerts you so corrections can be made. • Automatic oil drain - The unit drains system oil that was removed during recovery. • On-board oil injector - Lets you replace the lost oil at the push of a button. • Automatic refrigerant refill - You never have to stop in the middle of a job to change refrigerant tanks. The unit maintains a constant 12 to 15 pounds of refrigerant in an internal vessel, filling automatically from a disposable source tank and signals when the supply tank needs to be changed. • No special training needed - Plain language prompts on oversized high resolution display guide you through entire service • Built-in printer - Increases customer confidence, simplifies diagnosis and provides record of service; just press “Print” to get a hard copy of pressure/temperature, ambient conditions and other data. • Specifications • Voltage: 115V 60 Hz • Source Tank: 30lb or 50 lb. (not included) • Operating Range: 50 degrees to 120 degrees Fahrenheit (11 degrees to 49 degrees C) • Recycling Filter-Drier: 43 cu. in. (710 cc) Spin-On Type • Scale Resolution: 1/100 lb. (.02 kg) • Dimensions: 52"H x 33"W x 20"D (132 cm x 83.8 cm x 50.8 cm) • Weight: Approx. 202lbs (91.63kg) w/o source tank |